Every GAN is designed and programmed for a particular engine. GAN GA is equipped with the universal OBD2 connector whereas OEM cables are used for GAN GT, which are suitable for sensors in your particular car.

GAN GT is placed between the ECU and engine sensors. GAN GT optimizes data from the sensors according to the engine operating mode and the operating mode selected for GAN. Therefore, you will get more power and fuel economy at the same time.

GAN GA / GA+ is plugged into your car’s OBD II connector, through which GAN GA / GA+ communicates with the vehicle’s engine control unit. The tuning module is able to correct the ignition timing and quality of fuel-air mixture in real time, thereby achieving more power and fuel economy.

There are several manufacturers of tuning modules, which use a similar system. GAN is a combination of well-balanced software and a wide range of setups. GAN has a moisture-resistant aluminum housing (IP67 rated). The Smartphone connect feature allows you to fine tune GAN to a particular vehicle, without opening the housing. GAN has a few pre-configured operating modes. All GAN modules are made of high-tech materials (Aluminum and carbon).

GAN devices are designed for cars with naturally aspirated engines, diesel engines with Common Rail, turbocharged petrol engines. If your vehicle is not listed in our database, please contact our customer service department as we might be developing or testing the program for your vehicle at the moment.

Yes. We provide our clients with five free tune files for any vehicle available in our database. If you change your vehicle, you can reprogram your GAN to another one. In case of turbocharged engines, you may need to purchase another cable because different vehicles are equipped with different sensors.

Yes, GAN can reduce fuel consumption by adapted driving behavior. The increased torque primarily at low and mid-range RPM and faster upshifts result in a higher speed at a lower RPM and therefore fuel economy.

No. GAN modules are not designed to increase Vmax limit. Maximum speed is electronically limited and lawfully regulated by most countries.

GAN products for turbocharged engines are installed under the car hood; therefore, they are moisture-resistant and IP67 rated which means they are capable of withstanding water immersion. As a rule, none of the competitors can show such characteristics. GAN products for naturally aspirated engines are installed inside the vehicle; therefore, they don’t require moisture protection.

GAN modules are able to work at temperatures from -40 to +60 С. They work properly both in Asia or Africa and Northern countries such as Norway.

Yes, if the car is designed to run on biofuel.

There is a 5-year warranty for our products.

No. GAN modules are not designed to increase Vmax limit. Maximum speed is electronically limited and lawfully regulated by most countries.

GAN products for turbocharged engines are installed under the car hood; therefore, they are moisture-resistant and IP67 rated which means they are capable of withstanding water immersion. As a rule, none of the competitors can show such characteristics. GAN products for naturally aspirated engines are installed inside the vehicle; therefore, they don’t require moisture protection.

Yes. We provide our clients with five free tune files for every vehicle available in our database. If you change your vehicle, you can reprogram your GAN to another one. In case of turbocharged engines, you may need to purchase another cable because different vehicles are equipped with different sensors.